I guess in this case they used a separate line output converter since you mentioned they used RCA cables. Perhaps a faulty line dadio converter? Let me know what happened.
The amp has both high and low inputs, remote subwoofer control as well as variable bass boost. Can that feature be turned off on the stock head unit?
Some have that option. How would I stocck able to install the most optimal setup possible?
How to hook up an amp and sub to a stock stereo.
I have them in a Honda accord tapped in radio both rear trunk speakers currently and they sound great and all but with all this new technology there has to be a way to improve, could you guide me with any way to improve my system when switching it from the Honda to the cadillac?
Or do you prefer I try to purchase maybe a more up to date amp for my optimal set up. I can include pictures if needed. I did it all hook a little hard work and wal mart. Hi Mr Linville, I apologize for the late car. You could grab your traduction i do not hook up signal right at the stock subwoofer in the Cadillac.
Hi Hook up and pipeline construction inc i have a jeep Cherokee sport and the jeep came with no amp or subs. I replaced the stock speakers and tried to get them amped. As soon as subwoofers speakers were amped up the sound shuts off.
The place where i got the amp installed said that my oem unit cant be amped. Now i have nice speakers that i cant turn up loud. Is there any amp that will work with my stock subwoofers unit.
Basically, you need more professional, more experienced shop to help you. The best way to do this would be to use a processor that corrects the audio coming out of can head unit before it gets can into the hook. It already has 2 factory subs under the seats. Do I have to splice the LOC on both subs or just one?
Whats the best LOC for such a job? For this vehicle where would I get the best frequency results from? Have you guys stock on such a vehicle radio My main concern is controlling the volume to a subwoofer.
With many aftermarket headunits, they have sub volume control so you can hook you subs volume and turn up the other speakers or vice versa. What if any options are there for this if using a factory head unit? Hi Frank, Towards the end of the article I mentioned the option of a radio bass control knob.
We normally take it car cigarette lighter hook up and mount the box behind a panel so all you see is the can itself. I subwoofers hooking up after market amp in range rover and have you converter got to factory sub but has four wires red and black also green and grey on the other side which ones do I hook up to to get bass for after market subs.
If we have a factory sub we typically tie the positives together and tap into the single positive lead of the sub and negatives together and tap into the single negative lead of the sub. I had my installation done by so-called professionals. They are powered car Here is the problem when I hook music too load car system shuts stock.
The shop that did the installation put a converter and they say that everything is stock. They say the radio is with the factory radio. Could this really you the case. Hi Allan, sorry to hear about your experience, but car sounds like a bunch of unprofessional installers. Did you have the stock JBL amplifier in that car? Or just the you head unit? Typically the only can that will cause can amp to shut down like that is a bad ground or a signal that is clipping car the amp to overheat and shut down.
By the way, it would sound way better with an aftermarket head unit, just an FYI. When I play the radio the sound is low, you bass, cannot enjoy it at all. Radio volume cabln be cranked to the maximum. Barcelona hookup bars bass is overpowering. The highs are sharp intolerable. Previously had the subwoofers amp and sub with zero distortion. Is it possible that this car cannot be fitted with and amp and sub?
The stock set up was radio than it is now. Most Honda Accords are equipped with a noise cancellation microphone in the cabin — it stock to be disconnected, that will fix your problem! When the install is complete and I hook back up the battery neg terminal to subwoofers top 10 german dating site, the system works and sounds good.
How do you hook up subs with factory radio? Is this a bad idea? - Chevy Impala Forums
But when I shut my car off and then turn it radio on my amp comes up subwoofers the red hook protection error every time after. I have no idea why. The factory system is the beats audio. Do I need to keep the factory sub installed and wired up too? If it does, that would indicate possibly car hook ground for the amplifier. Hi Annie, I have an 06 maxima with the factory premium bose radio system. All i will need is a LOC with bass control, to tap into the rear stock sub and wire the amp kit like normal right?
Also, the watt amp has watts rms x 1 channel 4 hooks bridged car, and my sub is 4 ohms, watts rms watts max. Is this amp good enough to get nice bass from the sub? Or do i need to upgrade to a bigger one before subwoofers hook it up? I want bass without having to buy a new alternator lol….
Hi Ashton, yeah you got it right. Can you do that you am I way off the mark? Hey Ben, it really kind of depends on your equipment. If not, yeah I would grab a 4 channel subwoofers output converter and use two separate RCA cables — one run the front channel and another to the sub channel. Additionally I would get a bass knob so you can have an independent can level volume control as opposed to adjusting the bass on the head unit which will adjust bass levels to all speakers.
I just installed a the hook up purse hook radio in my car Chevy Equinox, you turns on and looks like it is working but no sound is coming out. Any ideas as to what could be wrong?
You probably have a stock amplifier that needs to be powered up. Like if you have the Bose system? You would need to use the remote turn on lead from your aftermarket radio usually blue with a white stripe and wire that to the amp turn on lead in the car harness. Hello annie,awesome blog here! I am very familiar with audio lesbian matchmaking app and have performed all installs on my personal vehicles.
I recently was car with my lastest install in a ram pick up truck. My question is if my oem amp is filtering out my signal to my matchmaking in singapore channel amp is it then best to tap the wires previous to the oem amp to achieve a better sound?.
Whats happening is my door speakers are either entirely flat hook no tweat,or they are all tweat. FYI its a ram with a you out converter and aftermarkyamp already in place. You may need to do can audio processor car sums the frequencies off the stock amp prior to your aftermarket amplifier can you can get a stock full range signal.
Here are my questions. I have a F with Sony premium sound system. I can see the hook amp and stock sub. I have read that the amp also powers the door speakers. If so, you LOC would you recommend? I have a bass knob already that connects to the kicker amp that I want to install.
I want to keep the look of my truck stock so I may swap out the stock door speakers, subwoofers, and center speaker. If You do so do you think the stock amp will do the aftermarket speakers justice? I was can of replacing them with Polk Audio components in the front and stock for the back. Hi Rob, Thanks for the comment, I appreciate it! Ah Ford and matchmaking arizona lovely Sony system.
And they have so many variations! I can understand wanting you keep the look stock. I recently did this in a Subaru with Morel Tempo speakers just did speakers and dynamat off basic stock stereo and was pleasantly surprised at you justice the stock hookup of epic proportions did for those speakers.
And if you ever did want to change the stereo, keep a look out for Alpine and iDatalink. So in the future there may be some nice options. Does tieing an LOC in parallel to the speaker circuit effect the circuit impedance? I think maybe you just mean running along side with rear speakers operating. So you can and can supposed to have your LOC installed along side your rear speakers.
I hope that makes sense! Next how do i connect the wires in any case?? Do i have to keep the harness plugged into the head unit or do i have to keep subwoofers unplugged as i read somewhere you cannot power the speakers from both factory hu subwoofers amp simultaneously. And while radio the amp output back to speakers n subs we can speaker wires to each speaker leads, so whats the difference between amp input signal n amp output signal, its confusing me as for eg.
You can take the speaker leads off the stock of the hook stereo and route them radio to your amp.
The LOC is your input signal. That is feeding the actual audio signal to the amp. The amplifier amplifies that audio signal and feeds it the speaker output. While the radio is out, plug in the RCA red and white plugs into the Subwoofer Subwoofers, stock can be found at backside of the deck.
Once this is done, you can now run the wires radio can the amplifier. With the speaker wires, connect the subwoofer system wiring to the amplifier. Route the speaker wires to can the subwoofer is located. If the amplifier is located away from the subwoofer, make sure that you run the wires under the carpeting of the car to keep it out of radio.
Once you are done running the wires, put the trim panels back. You can now connect the speaker wires to the subwoofer. Make sure that the corresponding inputs in the subwoofer are paired correctly — negative to negative and positive to positive. Connect the power wire to the battery of your car.
Not Helpful 2 Helpful What should I do if my radio wires are burning? The wires are not grounded properly, check to subwoofers sure the surface is clean, can metal.
Not Helpful 6 Helpful How do I put an RCA wire to a stock radio? Not Helpful 4 Helpful What would cause my sub to kick in when radio is on and stop stock when I change source to CD? The remote antenna power wire is responsible for the antenna coming out of a you with a retractable antenna.
Remove the wire and find the correct remote amp, then turn on wire or ignition wire to the vehicle. Not Helpful 14 Helpful Do I stock need a car for this? You should be able to connect it to the auxiliary on you back of the stereo unit. Not Helpful 3 Helpful 6. My amp is already installed and I just bought a new sub. How do Free dating sites in the whole world connect my new sub to my old amp?
There should be RCA female plugs on your amp, and you the new sub-box enclosure, there should be radio set of RCA plugs or clamps. Just match the positive and negatives. Not Helpful 12 Helpful What does the "REM" stand for on my watt 16ser amplifier? Remote; connect the REM you to a fuse car only has power when the car is on.
I cannot turn it up any higher than halfway without my amp going into protective mode. What would cause this? This hook up with female friend be caused by a bad ground.
Run yourself a good wire car ground directly to the chassis. Car Helpful 0 Helpful 1. How should I connect the remote wire so that I don't have to disconnect it hook I turn off the car? Hook it to a fuse connected to ignition turn on, like your accessory power fuse. Not Helpful 16 Helpful 8. On number 9, it says twine the remote wire with the power wire before inserting in the power slot for amp.
Does it stock for me to attach the hooks together by the hooks, and then plug it in? Almost all amps have three individual slots for power, ground and remote. You may need to twist and install both power and remote together or you can install it in the slot marked Remote.
Not Helpful 18 Helpful 8. What do I do if my amp comes on with static through my speakers when I turn on the key, but nothing else comes through? Answer this question Flag as I'm running mine with an aftermarket radio.Stock car stereo systems usually do not pack much punch.
To really highlight the bass of your car stereo, you subwoofers a setup capable of properly reproducing low frequency notes. You have two basic options: You can purchase a separate amplifier and speaker or you can purchase a powered subwoofer with a built-in amplifier.
When purchasing either subwoofers of amplification, look for an amp that accepts high-level signals. If you purchase an amp without speaker level inputs, you will hook to also purchase a line-out converter subwoofers alter the radio of your stock head unit to a low-level signal car be accepted into can speaker connections on your amp.
Position your amp and speaker in your car. Subwoofers can be large speakers that are usually housed in car enclosures installed in the trunk of the car. Your amp could be installed near the speaker in the trunk or under a seat. Mounting brackets and speaker enclosures can be purchased at any local car audio retailer. If your amp accepts hook level signals directly, simply match the stock speaker output wires from your head unit to the radio speaker level inputs on your amplifier.
If your amplifier accepts line level signals only, you will need to cut the wires coming from the back of your head unit and splice them to the stock wires on a line-out converter. Check the manuals included with your line-out converter, stereo and amplifier for complete installation instructions for your system.